UWB Anchor

Current Location：Home - UWB Indoor Positioning - UWB Anchor -

UWB Anchor VDU2503

Specification Download

1 Product Introduction

The VDU2503LP is a UWB-based high-precision positioning base station. The white curved design blends perfectly with the indoor environment, and the unique waterproof structure is Outdoor performance is also unabated; enhanced RF transceiver performance, VDU2503LP coverage is wider, positioning accuracy is higher; POE power supply, reduce power supply The layout of the line reduces the difficulty of construction.

2 Basic Parameters

UWB base station VDU2503	UWB positioning base station parameters
POE power supply	POE48V power supply
DC power supply	Input power is greater than 1W, input voltage is 4.5V-12V, 5V or 12V is recommended
Power consumption	150mA@5V
Supporting agreement	Compatible with IEEE802.15.4-2011 UWB protocol
Frequency	The default is 6.240-6.739GHz, which supports full channel ch1-5. The positioning system can switch the frequency channel
Typical transmit power	-6dBm
Receiving sensitivity	-105dBm (loss rate 10%, channel 5)
Data transfer rate	Default 6.8Mbps Support 110Kbps, 850kbps
Transmitting antenna	Configure different types of antennas according to customer needs
Positioning accuracy	10cm—30cm (UWB base station label is unobstructed)
Recommended base station layout interval	<50m
Data upload method	100M Ethernet
Base station clock synchronization mode	UWB wireless synchronization
Product weight	285g (±10g)
Operating temperature	-30°C~70°C
Storage temperature	-40°C~85°C
Waterproof level	IP67
Structure size	Length 178.0mm, width 94mm, thickness 58.0mm (except the thickest part of the bracket), dimensional error ± 2mm

UWB Anchor

UWB Anchor

UWB Anchor VDU2503

1 Product Introduction

2 Basic Parameters

Recommended products

UWB Dual Anchor VDU2506D

UWB Anchor VDU2506（Long Distance）

UWB Anchor VDU2613